Water Purification Equipment
Integrated Water Purification Equipment
Main features
1. It is suitable for water plants in rural areas, towns, industrial and mining enterprises where the water turbidity is less than 3000NTU, such as rivers, rivers, lakes, reservoirs and other water sources.
2. It has special adaptability to lake water sources with low temperature, low turbidity and seasonal algae.
3. Pretreatment equipment for pre-water treatment of high-purity water, beverage industry water, boiler water, etc.
4. Used in various industrial circulating water systems, it can effectively and significantly improve the quality of circulating water.
Performance advantages
1. The device itself meets the requirements of automatic operation from a series of operating procedures such as flocculation, sedimentation, sludge collection, sludge discharge, water collection, water distribution, filtration, backflushing, and sewage discharge. The personnel on duty only need to monitor and measure water quality regularly. None the operation and management of water purification equipment are required.
2. The high-concentration flocculation layer can make the impurity particles in the raw water fully collide and contact each other, increasing the probability of adsorption. Therefore, it can adapt to the water temperature and turbidity of various raw water, and the impurity particle removal rate is high. Be sure to use the when installed, it also has an algae removal function.
3. The fast sludge concentration chamber and adjustable automatic sludge discharge system can ensure the timely removal of excess sludge impurities, thereby ensuring a stable impurity particle removal rate.
4. Efficient flocculation and sedimentation effects keep the sedimentation water quality in good condition.
5. It occupies a small area. Compared with ordinary water purification structures, it can save more than 50% of the area. The height is about 4.10 meters and can be placed indoors and outdoors.
6. Convenient for expansion, transformation, reuse, relocation or reuse.
The integrated water purification device has the same purification process as the city water supply plant. It includes: coagulation tank, sedimentation tank, filter tank, water quality stabilization device, backwash device, water pump and electrical control cabinet.
They are introduced as follows:
Coagulation tank: The raw water with coagulant added enters the coagulation tank through the water inlet pipe, and is stirred with a special mixer to fully contact and react the suspended solids in the water with the coagulant to form alum flowers. Generally, water purification devices use vortex reaction to mix water and mix it.
The coagulant is mixed, but the effect is unstable due to changes in water volume. This water purification device uses a mixer to mix, so the effect is not affected by changes in water volume.
Sedimentation chamber: The water is coagulated with coagulant to form alum flowers, which flow into the sedimentation tank of the equipment for precipitation. The sedimentation tank adopts the inclined tube sedimentation method, and completes solid-liquid separation through precipitation in the trapezoidal inclined plate sedimentation chamber. The precipitated The sludge is discharged into the mud bucket.
Filter tank: The precipitated water flows to the filter tank for filtration.
The filter tank structure: the bottom is a water distribution pipe, the middle is quartz sand, and the upper part is anthracite. The filtration speed is 10m/h, and the clean water finally flows into the clean water tank for disinfection before use. filter tank the recoil cycle is about 12 hours, and the recoil time is 5-10 minutes.
description2