Leave Your Message
Agricultural Drone 416

Agricultural Drone

Products Categories
Featured Products

Agricultural Drone 416

This Tianli 4-axis 16L (water mist machine) agricultural drone adopts a split platform design, integrating intelligent surveying and mapping, efficient spreading and precise wine spraying. It combines powerful performance and reliable quality to set a new path for smart agriculture.

    Flight platform configuration parameters

    Poduct name TL-416
    Product wheelbase 1580mm
    Product weight  13KG
    Folding size 1010*610*575mm
    Product size
    1140*1130*575mm
    Flight control system
    Jiyi K++V2
    Working voltage 12-14S
    Power system
    Hobbywing X9 power suit
    Maximum pressure
    1mpa
    Medicine box volume 16L
    Maximum take-off weight 31G (maximum)
    Spray width 5-7m/s
    Flight distance 2-3km
    Flight time 15-20min
    Operation efficiency 60 acres/h
    Battery 16s 16000mah
    Charging time  15-20min
    Spray flow rate  8L/min

    Function

    1.Android mobile phone ground station, easy to use/PC ground station, full voice broadcast 
    2.Support route planning, fully autonomous flight operations, support AB point operations 
    3.Support one-click takeoff and landing, without manual intervention, improving safety
    4. Continue spraying after breakpoint, no medicine, low power return
    5. Drug amount detection, automatic recording breakpoint return without drug can be set
    6. Battery detection, low battery can be set to automatically record breakpoints and return to home.
    7. Fence function, log storage function, road lock function, no-fly zone function
    8. Vibration protection, star loss protection, medicine break protection
    9. Motor sequence detection function, direction detection function
    Daily work efficiency 300-400 acres
    2

    Power system

    416-3
    Hobbywing X9 power system
    The X9 power system is equipped with a 34-inch high-efficiency folding machine. It adopts FOC electronic control (optimized algorithm based on magnetic field oriented control). The maximum pulling force of a single axis can reach 19.2KG. It is suitable for large-load plant protection machines of 7-9.5KG/axis, and can easily fly up to 16KG. A load-bearing four-axis plant protection rotorcraft or a larger load-bearing model
    Hobbywing X9 power system                           
    Following the excellent heat dissipation structure, for use with high-power loads, the motor rotor widens the fan hot air duct to increase the motor torque coefficient and reduce the current and heat load under the same pulling force: the anti-impact design at the rear end of the motor base can absorb impact and protect the motor and ESC to reduce damage to power components caused by crashes due to malfunctions
    1
    2
    Navigation light
    Added navigation light flashing display when power failure occurs to immediately remind the user of the specific fault status to promptly detect and confirm the problem and ultimately eliminate the fault in a timely manner for safe flight.
    High lift, high force efficiency propeller
    High-strength special carbon fiber material propeller, the propeller is made of high-strength special carbon fiber material injection molding
    The paddle body is strong and light, with good consistency and excellent dynamic balance characteristics. The aerodynamic shape is optimized and designed by aerodynamics experts.
    Coupled with the electromagnetic design of the motor specially optimized for this propeller and the efficient FOC (field-oriented control, commonly known as sine wave drive) algorithm, the entire power system has advantages in both lift and force efficiency.


    4

    Dual channel drone smart lithium battery BF-60/55 charger

    3
    Gigabit dual-channel smart charger is a product for fast charging of drone lithium batteries. The maximum charging power is 3000W. The product adopts an independent power supply design, and the internal circuit is highly intelligent, integrated and modular. High-precision data is used to monitor the optimal charging algorithm to achieve an efficient and safe charging process and delay battery aging. This product is one-touch operation, convenient and concise without setting up. The entire charging interface is clear and intuitive. The charging status is displayed digitally, allowing you to intuitively understand the status of the charger and battery. This product is one of the best configurations for plant protection drones.
    Charger parameters

    Size

    340*195*145mm

    Default plug

    AS150U

    Weight

    5.5kg

    Charging channel

    2

    Input voltage

    AC120-240V

    Balanced current (maximum)

    550mA

    Input frequency

    50-60HZ

    Static power consumption (maximum)

    310mA

    Charging power

    3000W(MAX)

    Charging current (max)

    55A( one battery)

    Number of battery strings supported

    12S/13S/14S

    Equipped with Yunzhuo H12 LCD remote control

    3
    The H12 series uses the new Qualcomm processor, equipped with Android embedded system, advanced SDR technology, and super protocol stack.
    To make the image clearer, it needs to be lower, the distance is farther, and the anti-interference is stronger. It can be applied to 50 or 60 drones, robots, industrial control equipment, etc.
    Supports rich interfaces such as SIM, digital camera, serial port, S.BUS, etc.
    Plant protection FPV can be used in security, fire protection, electricity, surveying and mapping robots, border defense, etc., as shown on the scene.
    The use of waterproof, dustproof and drop-proof materials and structures ensures that it not only feels good but is also durable!

    Remote control parameters

    Product model

    H12

    Number of channels

    12

    Working voltage

    4.2V

    RF power

    20DB@CE/23DB@FCC

    Frequency band

    2.400-2.483GHz

     frequency hopping

    new FHSS frequency hopping

    Upgrade

    App online

    upgrade Weight

    530g

    size

    190*152*94mm

    Battery

    10000mA/H

    Battery life

    6-20 hours 

    Charging interface

    TYPE-C

    Applications

    Helicopters, fixed wings, multi-rotors, vehicles and ships

    description2

    111
    Ultra high definition
    1920*1080 1000nlts
    5.5-inch bright display
    222
    Ultra-long distance link
    Measured distance is 5-30 kilometers
    333
    Super long battery life 6-20h
    444
    Super scalability
    S.BUS/PPM/PWM etc
    555
    Super open
    Provide SDK and protocol documentation
    666
    Super easy to use
    Android system for drones

    Receiver parameters

    Product model

    R12

    Working voltage

    4.5-5.5V

    size

    51*41*12mm

    Number of channels

    12

    Working current

    14mA@5V

     Weight

    14g

    description2

    Carbon fiber machine rod

    1
    Advantages of carbon fiber mast: It has excellent corrosion resistance and heat resistance, can withstand the corrosion of water and various media in nature, and the effects of thermal expansion, and can meet the special requirements of long storage life of drones under various environmental conditions. Reduce life cycle costs of use and maintenance.
    Plug-in medicine box
    Advantages: 1. Light weight, high strength, durable. 2. Equipped with scale to clearly see the loading capacity.

    Plug-in design, more convenient.
    1

    Product standard configuration

    2
    One plant protection drone  
    2
    One smart remote control
    4
    One dual intelligent fast charger 
    2
    One smart lithium batteries